Related links
Product Information
- Author
- PG Regalbediengeräte (vormals Sektion IX)
- EAN
- 4250697522200
- Edition
- 2016
- Delivery
- free of charge
FEM 9.865 Energy consumption - determination methods (ECoDeMISE)
Prices incl. VAT
250.00 EUR excl. VAT
Download: Free of shipping costs!
available
Description
19 Seiten
FEM - Product Group Intralogistic Systems / Racking and Shelving 2016
Energy consumption – determination methods (ECoDeMISE)
- Calculation, measurement and evaluation methods of Intralogistics Systems and material handling equipment -
PG Intralogistic Systems
158 pages
Edition 10-2017
250,- € + VAT
Together with this guideline goes a complimentary Excel-Sheet
Contents:
1 INTRODUCTION AND AIMS
2 SCOPE OF RECOMMENDATION
3 TERMS AND DEFINITIONS
INTRALOGISTICS SYSTEM
INTRALOGISTICS SUBSYSTEM
MATERIAL HANDLING MODULE
MATERIAL HANDLING COMPONENT
LOAD UNITS USED IN AN INTRALOGISTICS SYSTEM
OPERATION MODE OF AN INTRALOGISTICS SYSTEM, SUBSYSTEM OR MODULE
EVALUATION
VALIDATION
VERIFICATION
4 ABBREVIATIONS
5 DOCUMENTS REFERRED TO
6 DETERMINATION PROCESS
STEP 1: DEFINE REQUIREMENTS AND PROPOSE SOLUTIONS
STEP 2: DETERMINE ENERGY CONSUMPTION OF ECODEMISE SCENARIO
STEP 3:MEASUREMENT OF DEFINED ECODEMISE SCENARIO
STEP 4: EVALUATION OF DETERMINATION AND MEASUREMENT
7 METHOD IN DETAIL: CALCULATION OF THE ENERGY CONSUMPTION OF INTRALOGISTICS MODULES AND COMPONENTS
DEFINITION OF SYSTEM BOUNDARIES AND SETTING ASSUMPTIONS
PREPARATION OF INPUT PARAMETERS FOR FORMULAS
FORMULAS FOR CALCULATION
8 METHOD IN DETAIL: MEASUREMENT OF THE ENERGY CONSUMPTION OF INTRALOGISTICS MODULES AND COMPONENTS
DEFINITION OF SYSTEM BOUNDARIES AND ASSUMPTION.
PREPARATION OF MEASUREMENTS
EXECUTION OF THE MEASUREMENTS
ANALYSIS AND INTERPRETATION OF THE DATA
9 METHOD IN DETAIL: EVALUATION OF SYSTEM MODEL AND REAL SYSTEM
GENERAL PROCEDURE
EVALUATION OF THE ENERGY CONSUMPTION
EVALUATION OF THE POWER CONSUMPTION
10 OVERVIEW OF MATERIAL HANDLING MODULES OF CONSIDERED INTRALOGISTICS SYSTEMS
11 CONTINUOUS CONVEYOR MODULES
ROLLER CONVEYOR
BELT CONVEYOR
CHAIN CONVEYOR
12 MERGING AND DIVERTING MODULES
ROLLER JUNCTION
BELT JUNCTION
TRANSFER AND LIFT MODULE WITH BELT
TRANSFER AND LIFT MODULE WITH CHAIN
TRANSFER AND LIFT MODULE WITH ROLLS / WHEELS
PUSHER
DEFLECTOR
ROTARY TABLE MODULE
13 SORTER SUBSYSTEM AND MODULES
DRIVE MODULE
CARRIAGE MODULE
CARRIER / TRANSPORTATION MODULE
14 SHUTTLE SUBSYSTEMS
SHUTTLE VEHICLE MODULE.
LIFT MODULE
15 STACKER CRANE MODULES
DEFINITION AND FUNCTIONAL PRINCIPLE
USE CASES
RELATED STANDARDS
ASSUMPTIONS AND REQUIREMENTS FOR CALCULATION
FORMULAS
ASSUMPTIONS AND REQUIREMENTS FOR MEASUREMENTS
MODULE MEASUREMENT TEST SCENARIO
EVALUATION
16 LOAD HANDLING DEVICE (LHD) MODULE
DEFINITION AND FUNCTIONAL PRINCIPLE
USE CASES
RELATED STANDARDS
ASSUMPTIONS AND REQUIREMENTS FOR CALCULATION
FORMULAS
ASSUMPTIONS AND REQUIREMENTS FOR MEASUREMENTS
MODULE MEASUREMENT TEST SCENARIO
EVALUATION
17 STANDARDS REFERRED TO
18 PARAMETER LISTS FOR FORMULAS
19 ANNEX
20 CHANGES AND HISTORY OF THE DOCUMENT
The terms and procedures defined in this recommendation are applicable to a broad variety of industries using intralogistics systems, ranging from warehouses, airport baggage handling systems or parcel sorting systems. The measurement and calculation recommendations are intended for planners, manufacturers and purchasers of intralogistics systems and aim to enable a methodical approach to calculate and measure the energy consumption of intralogistics systems including subsystems, modules and components.
To provide a recommendation with a clear set of actions and guidance, the awareness for scope limitations is important. For the analysis, the following restrictions have been defined:
• The outcome of the calculations and measurements is the electrical energy consumption described in kWh of the ECoDeMISE scenario. The estimation is not transferable to the annual consumption of the system.
• The focus of this recommendation is on energy consumption. Peaks (and power supply size) during a day are part of the value of the energy consumption but not considered in detail in this recommendation.
• As a matter of principle, this standard assumes professional installation and maintenance. The results in this recommendation were achieved by systems with less than 1.000 operating hours.
• Installation workmanship has a significant impact on the energy demand; as a matter of principle, this standard assumes professional installation and maintenance.
The recommendation is focused on the Basic-Calculation and the Advanced-Calculation method. There, the main formulas and assumptions are set and the user gets a helpful example how to calculate the energy consumption by itself. The recommendation also includes a method for measurements on installed systems. The measurement method is described for modules as well as for complete systems. Afterwards a method for comparison of the calculated energy consumption with the measured data is given, so that the reliability of the calculation is shown.
Product link copied to the clipboard.