Zu "4250697516445" wurden 38 Artikel gefunden!

VDMA 1987 Seiten / pages: 13 Datei / file: PDF

EHEDG July 2006 Seiten / pages: 29 Abundantly illustrated, this paper provides guidelines for the correct execution of on-axis hygienic (sanitary) welding between pipe segments, or between a tube and a control component (e.g. valve, flow meter, instrument tee, etc.) It deals with tube and pipe systems with less than 3.5 mm wall thickness, built in AISI 304(L) (1.4301,...

VDMA 1987 Seiten / pages: 4 Datei / file: PDF

VDMA 1987 Seiten / pages: 8 Datei / file: PDF

EHEDG 2004 Seiten / pages: 9 ISBN: 0-9075-0315-2 Food processing equipment may need to be sterilised before use, and it is important to ensure that the sterilisation method applied is effective. Thus, it is necessary to determine under which conditions equipment can be sterilised. This paper details the recommended procedure for assessing the suitability of an item of...

VDMA 1998 Seiten / pages: 305 Datei / file: PDF

EHEDG 2004 ISBN: 0-9075-0320-9 Seiten / pages: 23 This document addresses packing systems of solid food products and supplements earlier guidelines. Solid food is characterised as having a water activity of >0.97, low acid, not pasteurised or sterilised after packaging, and distributed through the cool chain. Examples include fresh meat and some meat products, cheeses,...

FKM 2002 Heft Nummer 273 Vorhaben Nr. 238 Kurzfassung: Berechnung von Risseinleitung und Rissfortschritt in Hochtemperaturbauteilen IfW Darmstadt und der MPA Stuttgart gemeinsam durchgeführte Vorhaben befasste sich zum Risseinleitungs- und Rissforttschrittsverhalten unter Kriech-, und Ermüdungsbeanspruchung an 1% CrMoNiV-Stählen und 12% CrMoV- für Hochtemperaturbauteile des...

EHEDG 2nd Edition 2004 ISBN: 0-9075-0314-4 Seiten / pages: 9 This document details the test procedure for assessing whether an item of food processing equipment, intended for aseptic operation, is impermeable to micro-organisms. Small motile bacteria penetrate far more easily through microscopic passages than (non-motile) moulds and yeasts. The facultative anaerobic...

EHEDG 1993 ISBN: 0-0750-3136 Seiten / pages: 19 This document describes the techniques required to produce hygienically acceptable welds in thin walled (

EHEDG 2nd Edition 2007 ISBN: 987-0-9075-0327-9 Seiten / pages: 21 Using the general criteria for the hygienic design of equipment identified in Doc. 8, this paper illustrates the application of these criteria in the construction and fabrication of closed process equipment. Examples, with drawings, show how to avoid crevices, shadow zones and areas with stagnating product,...

FKM 1999 Heft Nummer 248 Vorhaben Nr. 216 Kurzfassung: Es wurde das Verhalten von Sackloch- und Durchgangslochverschraubungen in thermoplastischen Bauteilen bei erhöhter Temperatur (bis 120